Hotline0579-87216785
NEWS
News
Home >> News Center >> Industry News >> Mechanical bearing inspections

  Check area must be clean and free of dirt and debris to avoid bearing. Even a smallfragment into the bearings can create a high stress may lead to early fatigue.

  When a device is taking service to a regular inspection or maintenance, take this opportunity to also detect bearing to ensure that they continue to apply the tolerance specifications. In some applications, life expectancy may be limiting factors of equipment maintenance plan.

  Equipment tear downs has been fully checked, you should carry out regular checks to make sure that the bearing is in good operation and proper lubrication. In order toreduce the need for these checks, and closer monitoring of bearings and of health,TIMKEN bearing condition monitoring systems are available, on a bearing of vibrations and temperature.

  Scheduling equipment tear check of rolling bearings depends on the operating conditions change. Your device appropriate inspection plan, counselors.

  Check area must be clean and free of dirt and debris to avoid bearing. Even a smallfragment into the bearings can create a high stress may lead to early fatigue.

  In addition to checking the bearings, overhaul should include housing and shaft. Check for burrs or sheet metal of the inner and outer rings and the dorsal surface (Figure 5). Burrs or surface of the chip can be damaged by scraping or file.

  Check for proper size, shaft, burrs or other damage. Micrometer is proposed axis of12 points. If there is evidence of the shaft or casing wear, should check the originalequipment manufacturer's specifications.

 

Previous: When to replace car bearings

Next: Bearing maintenance tips